Easy accessibility for maintenance

The washing machines for complex mechanical parts like the automobile cylinder block or cylinder heads are like machine tools with a lot of mechanics , hydraulics , pneumatics and electric components.

The reliability of the machine is directly linked with the good working of these components . These components are submitted to very bad conditions compared with a machine tool.Inside a washing machine there is a lot of bad conditions : dust air, humidity , temperature , vibrations, water spraying , chemicals( detergents) , coolants (coming with the parts to be washed) ,chips ,burrs ,.. The conditions are much worst than in a machine tool.

These conditions are very hard for the machine components and the engineering of a good washing machine has to consider as a first task to limit the components inside the washing machine.

This task is not always 100% possible and inside the machine there are also  mechanic components that have to be easy to maintain and repair. For this reason the second task of a good washing machine engineering is to take care of the accessibility to all the components around the machine.

Easy accessibility of the maintenance operator to all the components located outside the machine ( cylinders , mechanics, switches,valves, check valves , distributors…) and also to the inside the machine.

Depending of the machine size and the components inside the machine the accessibility can be made with large doors in order that the operator can access to the component keeping his foots outside the machine.

But in high production machines ,or big machines the operator has sometime to go inside the machine for the maintenance . For that, late 70’s the company Agullo launch a big innovation . A complete wall of the machine , all along the machine was a door with a vertical opening( big size guillotine door). The door received different names trough the times , vertical door , vertical guillotine door , full access side door, full size door … and was rapidly adapted by others manufacturers .

The first installations with these full size guillotine doors we supplied by Agullo to Peugeot and Renault in France . They were driven by a motoreducer and two chains on the top. The door opening was from the roof till the transfer .

The french competitor Stic Hafroy seen the machines in Peugeot and Renault quickly “adopted” this type of door in their machines.

The dimensions for the doors were growing in length (machines with 12mts doors length) and in heigth allowing to the operator to go and walk  inside the machine . Normally the machines were equipped with only one door in one side of the machine , but Agullo supplied also machines with two doors one in each side of the machine.

 

 

 

 

 

As one of the main customers was Ford Motor co. in UK and Germany the competitors in these countries also adopted the full size access door ( Harry Major  , Beys…).

 

 

 

Harry Major

 

In Italy for Fiat the machines had one full size guillotine door in one side of the machine and one corridor all along the machine in the other side allowing the operators to walk all along the machine both sides of the transfer.Seen the machines supplied to FIAT the local competitors Tecnofirma , and ICOM incorporated the door to their machines.

Agullo

 

 

 

 

 

Icom

 

Tecnofirma

 

 

The driving of these doors was progressing from the double chain and one reductor , to the rack and pinion , or gear and pinion and from the top driving to the floor driving , always by cost reduction reasons because the safety was never a concern .

In the 90’s  and 2000’s a lot of machines were supplied to Ford , Chrysler and GM  USA with these doors been accepted on all the customers safety standards.

 

Agullo-Dürr Ecoclean

 

 

                         Agullo/Dürr Ecoclean

 

 

 

In USA the full size guillotine door was also adapted by competitors like Valiant

 

Valiant

 

 

The challenge of these doors is not only the mechanics for the vertical movement for open/close the door but the water leaks and the noise contention. Any small gap on the adjustment to the machine wall could allow the water leaks outside the machine or to rise the machine noise level. The door construction, the materials used, and the design allows to avoid all those problems.

The high production machining lines in the automotive industry needs high efficiency and reduced cost. Few operators are operating the machining lines , and the first maintenance task are made by themselves . The machine needs to be easily controlled , and maintained . The design of the machine has to take in consideration the easy access to all the machine components , the easy and quick dis-assembly and repair . Full access , illumination , clean air, clean access .

Don’t forget : The washing machine needs maintenance because they work on worst conditions than the machine tools. It is a supplier task to reduce the maintenance time needed and also to allow the easy maintenance.

Part2clean Stutgart (4) Rotary transfer washers

Out of the already commented rotary transfer machines for small components , in the Parts2clean show I noted other manufacturers that they are active to wash or deburr bigger parts ( main powertrain components as cylinder block, cylinder head, crankshafts, gear box…).

Almost all the manufactures of these machines were German , and only few “foreign”. One of this foreign manufacturers was the Italian Tecnofirma. This company is an “old” company in the business. At the beginning mainly present in Italy . Years ago it started to wash cylinder block and cylinder heads Automobile components but the presence of AGULLO and ICOM in Italy stopped their development in the 1990’s . They were limited to crankshafts transfers or gear box components so long as AGULLO and ICOM had orders for the cylinder block and cylinder heads in line transfer washers for FIAT.

Tecnofirma developed rotary transfer washers for other components related to the motorcycles , tractors or gearbox components in Italy and also for the customer subsidiaries in Latinamerica or East Europe.. Now is improving his sales action in Germany and France , and they presented an interesting rotary transfer wash/deburr machine ( four stations) with an small ABB robot carrying a jet for the flex wash or blow-off.

 

 

 

 

The robot is applied directly inside of the wash chamber and has a jet on his wrist.

The High pressure pack and filter is installed in a separate module with the classic Hamelmann piston pump. The filtration is trough a safety cartridge filters and automatic paper filter

The machine has a robust look and the price announced seems interesting. Tecnofirma has a good experience in mechanical components customers. I hope that they can have a development in the next years if they achieve their export development.

Another of the “foreign” exhibitors was the Japanese SUGINO .This company has also a long history on the wash-deburr business. Their main market is the Japan companies and their transplants to other countries.

SUGINO has the best experience in high pressure applications in the wash and the deburr. Don’t forget that the Japanese automobile companies were the first ,worldwide ,to improve their cleanliness levels using high pressure water in their washers and after using also the high pressure for the deburring.This Market was advanced against the European or American markets.

SUGINOis the sole wash producer in the world, that I know ,that is also producing their high pressure pumps. In fact the division of high pressure pumps and his applications in all the industries is one of the hard points of Sugino. They have several patents and the advantage to produce themselves also the high pressure accessories ( 2ways valves, safety valves, HP jets, lances, distributors…).The use of the high pressure goes till to the jet cutting at 4.000 bars

Surprisingly despite their high experience and acknowledgement in the high pressure they have been not active in Europe. Their competitor KITO at least supplied Toyota in UK but Sugino has been out of this market. In USA they sold some machines 15 years ago in the gear box Ford factories but they din’t push too much the market and remain anecdotal.

Is really a pity because for me Sugino has experience , acknowledgement and inventive. Some tricky devices and original process invented by them ,and not yet discovered by the German suppliers( neither Americans), are fantastic and very efficient.

In the Parts2clean exhibition they presented the “Jet Clean Center”. Is a cell with CNC axis that allows to high pressure wash and high pressure deburr small components . These components can be manually load or robot load.

The must interesting thing of this machine is the Turret tool jet head. The turret has 6 possible different high pressure jets or lances that can be feeded individually trough a HP distributor. This machine is valid for small productions in a cell configuration and has been the first machine on this business to adapt the form of a High pressure cell , idea reproduced now for a lot of manufacturers.

 

SUGINO has also a family of rotary transfer machines for cylinder blocks and cylinder heads . The machine with two , three or four stations is integrated on in line or in cells productions . Recently they have supplied these machines for the new Mazda-Ford factory in China. They have a combination of the machine with a Cartesian 4 axis wash gantry robot located in the roof totally outside the machine as Durr Ecoclean Barcelona had.

The originality of their machine is that the load/unload of the parts can be made automatically without any further device .A vertical movement of the complete rotary table allows the part to be load/unload on a conveyor at the same time that the same vertical movement of the table allows to better wash and blow-off the parts in the other stations.

The application of the gantry robots instead of anthropomorphous robot in the high pressure wash-deburr applications is an interesting debate that I will write about in one further post after also a further robot cells post.

The weak point of these machines is that the indexing driving device with the vertical movement of the table is inside the machine , not easily accessible for maintenance. To do the same process the design of the Dürr Ecoclean Barcelona transfer rotary machine was much better solved with full accessibility to all the mechanics either rotary , lifting or gantry ( but more expensive of course).

In general the SUGINO wash-deburr processes , and high pressure devices are original,tricky and effective. The mechanical concept of the machine and their sizes are really designed for the Japanese Market . The design should be hardly modified to support the European rules and standards and by this reason is very difficult that some European client accept their machines standards. Is not their fault is a question of market demands. Something similar happened on the first machines supplied to Ford America.

But for markets like the Japanese or China, Korea..where the demand for big access for maintainability , and safety rules are not so stringent than in Europe , these machines are valid. But as the price is also important and these solutions are chipper, the client has to balance his decisions.

SUGINO has now a subsidiary in Chekia for his division of machine tools. It would be maybe a good opportunity for them to redesign their machines for the European Market demands.

OK ,that’s all for today. See you soon in my next post.